本試驗臺主機變頻調速，轉速任意預置，數字表顯示轉速、計數、油溫、檔位。
01. 測試不同轉速下的各缸供油量
02. 靜態檢查各缸供油的時間
03. 檢查調速器性能
04. 分配泵電磁閥的試驗
05. 檢查氣動調速器性能
06. 檢查增壓補償器性能
07. 檢查分配泵的輸油供油能力
08. 測量分配泵泵體內壓
09. 檢查氣膜調速器負壓性能
二：主要技術參數：
1.量筒：45ml 量筒各兩套；
2.燃油箱容積：60L；
3.油溫自動控制：40±2℃；
4.試驗油濾油精度：5μ；
5.直流電壓12V和24V；
6.供油壓力：低壓：0~0.4Mpa，高壓：0~4Mpa;
7.泵體內壓顯示：0~0.16Mpa及0~1.6Mpa；
8.氣壓顯示：正壓：0~0.3Mpa負壓：-0.03~0Mpa；
9.轉速預置：0~4000RPM可任意預置；
10.齒條行程量程：0~25MM；
11.中心高：125MM；
12.飛輪慣量：0.8KG.M2。
功能和特點介紹：
01. 測試A P I II VE等柴油泵不同轉速下的各缸供油量
02. 對噴油泵進行斷油檢測
03. 可左右兩邊控制設備運轉，方便用戶操作。
04. VE分配泵電磁閥的試驗
05. 該試驗臺轉速 計數均可預置，并可進行保存，升降速快捷。
06. 對帶增壓補償油泵模擬測試
07. 檢查VE系列分配泵的輸油供油壓力等參數
08. 測量分配泵泵腔體體內壓，并可測試流量。
09. 設備轉速可根據需要設定（1-4000r/min）
10配PJ40噴油嘴校驗器及其他輔具。
本文來源：12PSB-D型噴油泵試驗臺整理發布，僅供參考，不做實際應用。具體詳細細節需要聯系我們網站上面的電話進行咨詢確認。
12psb-d fuel injection pump test bench functional parameters:
The main machine of this test-bed is variable-frequency speed regulation, the speed is preset arbitrarily, and the digital meter displays the speed, count, oil temperature and gear.
Function introduction:
01. Test the oil supply of each cylinder at different speeds
02. Statically check the oil supply time of each cylinder
03. Check the governor performance
04. test of distribution pump solenoid valve
05. Check the performance of pneumatic governor
06. Check the performance of boost compensator
07. Check the oil delivery capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Check the negative pressure performance of the air film governor
10. 12psb-d fuel injection pump test bench conducts the sealing test of fuel injection pump
2： Main technical parameters:
1. Measuring cylinder: two sets of 45ml measuring cylinders;
2. Fuel tank volume: 60L;
3. Automatic oil temperature control: 40 ± 2 ℃;
4. Oil filtering accuracy of test oil: 5 μ；
5. DC voltage 12V and 24V;
6. Oil supply pressure: low pressure: 0~0.4mpa, high pressure: 0~4mpa;
7. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;
8. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;
9. Speed preset: 0~4000rpm can be preset arbitrarily;
10. Rack stroke range: 0~25mm;
11. Center height: 125mm;
12. Flywheel inertia: 0.8kg.m2.
Introduction to functions and features:
01. Test the fuel supply of each cylinder at different speeds of diesel pumps such as a p I II ve
02. Conduct fuel cut-off detection for fuel injection pump
03. It can control the operation of the equipment on the left and right sides, which is convenient for users to operate.
04. Test of VE distribution pump solenoid valve
05. The speed counting of the test bench can be preset and saved, and the speed rise and fall is fast.
06. Simulation test of oil pump with booster compensation
07. Check the oil delivery pressure and other parameters of VE series distribution pump
08. Measure the pressure in the cavity of the distribution pump and test the flow.
09. The rotating speed of the equipment can be set as required (1-4000r/min)
10 equipped with Pj40 injector calibrator and other auxiliary tools.
Source of this article: 12psb-d fuel injection pump test-bed is sorted out and released for reference only, not for practical application. For specific details, please contact the phone on our website for consultation and confirmation.
英文由百度翻譯，僅供參考。
